Home » 2017 Jeep Wrangler Speaker Upgrade

2017 Jeep Wrangler Speaker Upgrade

In this article, we’ve collected the greatest 2017 Jeep Wrangler speaker upgrade available on the market. We update our selection frequently to include new and popular models, making it easier for you to choose. When you buy anything in our independently chosen collection, we may get a commission without charging extra fees.

This article’s 2017 Jeep Wrangler Speaker Upgrade recommendations are based on personal, objective criteria. The ranking is determined by measures such as quality, performance, features, customer reviews, and ratings. We’ve included some of the most important traits of each Jeep Wrangler Speaker Upgrade in the following section so you can quickly identify the best one for your needs.

Mopar JEEP WRANGLER JK KICKER SPEAKER

The ever-so-popular Mopar Jeep Wrangler Kicker Speaker is where we begin our list of the top speakers for the Jeep Wrangler. It's a must-have for anybody who owns a Jeep. In fact, if we're being honest, these are the finest replacement speakers for your Jeep Wrangler that you can buy. The premium JBL audio system is compatible with all two- and four-door Wranglers built from 2007 through 2019. You can install them on the dash or soundbar, and you have the option of putting them in place of your old speakers. The speaker set may also be installed precisely on the rear doors of Grand Cherokee, Commander, and Liberty models. You get a comprehensive kit with all of the elements required for a full speaker replacement out of the box, so there's no need to purchase anything separately. Adding them to the wrangler is simple - there's no need for adapters, trimmings, wire splices, or anything else. It's plug and play; in fact, the old cables functioned just fine. If done correctly, the speakers will be installed in about 10 minutes, and you'll be shocked at how much better the sound is. The Mopar JEEP WRANGLER KICKER SPEAKER features acoustic chambers, ribbed surrounds with UV protection, and polypropylene cones that perform flawlessly. The two speakers can put out a stated 150 watts peak power and 75 watts RMS, allowing the bass to thump while the treble can handle high-level frequencies, and vocals will be as clear as possible.

buy on Amazon

Polk DB652 Coaxial Speakers

This is one of the most powerful speaker systems on the market right now. It has above-average peak and RMS power, which means it can loudly. The sound quality is also good. While it does not have the same sound quality as some of the most expensive sound systems, for driving in your Jeep, it will suffice. Another excellent feature is IP55 certification, which Polk audio equipment is known for. The DB652 speakers are water-resistant, and they can withstand rain, snow, or even driving underwater. I had one problem during my testing: the unpleasant installation approach. It's because it's tough to align the mounts to the factory Jeep holes in a stylish way. But once you've done that, everything else will be a breeze.

buy on Amazon

The Rockford Fosgate R16742 Prim

The size of the box has something to do with this. You can get a cage that is 4 inches, 5.25 inches, or 6 by 8 inches. Choose one that is suitable for your vehicle. Because it has a recessed tweeter, this speaker is one of the best choices for your Jeep Wrangler. Others protrude at the same time as the primary speaker sounds. The smallest of this speaker has comparable sound quality to that of larger speakers. The Rockford Fosgate Prime R1675*2 generates clear music. This speaker's dominant function keeps it going for a long time without deteriorating in sound quality. When this speaker is on, you can clearly hear the instruments in a song. They are less expensive than many other speakers.

buy on Amazon

The Polk Audio DB651 6.5”/6.75” Speaker

The Polk Audio DB551 is one of the Best Speakers For Jeep Wrangler Sound Bar, and it is said to sound better than any prior Jeep Wrangler speaker. It can transform your car into a magnificent concert hall. The Polk Audio is the best speaker for the Jeep Wrangler, in the opinion of many people. It has a tweeter dome and a Mica cone woofer that generate large sounds. The Polk Audio is compatible with a wide range of applications. Its flexibility may surprise you. When a speaker is highly efficient, it uses less power and produces more sound. Furthermore, the Polk Audio performance is unrivaled, with a high degree of longevity. The speaker's muscular ABS grilles provide elegance to your vehicle interior. To make a smooth frequency, Polk Audio engineers developed these speakers. There won't be any limitation because the Polk Audio has been able to eliminate noise.

buy on Amazon

Pioneer TS-A1680F A Series

The Pioneer TS- A1680F should not be left out of any list of the finest speakers for a Jeep Wrangler. This is one of the most powerful speakers on the market today. With the Pioneer TS speaker, sound quality is excellent. These speakers are available in a variety of multi-fit installation adapters, allowing you to fine-tune their performance considerably.

buy on Amazon

Always A Bargain 4U Soundbar, Sound Bar for Jeep Wrangler

Our next product is one of the top overhead sound bars for Jeeps. Vertically Driven Products' Always A Bargain 4U Soundbar competes with other speaker systems. If you're looking to replace your current speakers, the difference in sound quality will be tremendous. If you're tired of listening to your music through tinny, ineffective speakers that produce an echo in the cab or are too loud for safety reasons, these premium soundbars will provide no-compromise sound quality. With the windows up or top-down, the music will be as basic as it gets, with strong bass and treble that will never overpower the vocals at any speed or temperature. In fact, the clarity is so outstanding that people a reasonable distance away can hear the lyrics or appreciate the beat when you raise the volume. So, while stuck in traffic, your Wrangler may be a source of amusement for many. Finally, the speakers are made of plastic that is intended to endure high-impact situations, so no matter how much it rains or snows, your audio will stay clear and the soundboard won't be damaged. The Vertically Driven Products Always A Bargain 4U Soundbar, Six Speakers has a three-way maximum output of 200 watts and a 50-watt RMS. It consists of two six-inch woofers, two one-inch tweeters, and two two-inch midrange speakers. The cost is very reasonable, and the unit can be installed in a few minutes without any help.

buy on Amazon

MCM Custom Audio 60-10021 Wakeboard Speaker

It's known for its loud sound and is thus eligible to be on the select list of finest speakers for the Jeep Wrangler. The parts are durable and may also be used outside without any problems. The rain has not worn away at the plastic body. The bass, on the other hand, is not as safe as some others. We shouldn't overlook the fact that it is also simple to set up and take down, given its nature as an outdoor speaker. It is feasible for you to mount them in any way you want; it just depends on the roll cage that is offered in your Jeep Wrangler. On the other hand, over time, you may find that the roll cage is always positioned sideways, so you can simply clamp them to that bar.

buy on Amazon

Jeep Wrangler Kicker Speaker Kit Upgrade

If you want something more than a typical speaker's sound, and not simply any sound. The Kicker Speaker Kit Upgrade in the mid-range, high bass is for you. Acoustic standards require that polypropylene cones be encircled by ribs, which are ideal for sound cancellation. The installation is typically simple and should only take ten to fifteen minutes. The Kicker speakers in the Wrangler are made to play loud, and they do so with style. However, a few people have complained that they break after only a few days of usage.

buy on Amazon

JBL GTO629 Premium Coaxial Speakers

To make the GTO speakers stand out, JBL opted for a somewhat distinctive appearance. They're appealing in any setting and provide decent bass response. When compared to the other two speakers we looked at previously, they are, in fact, superior in this respect. This is due to the carbon-injected cone, which is larger than most cones of its size range. The GTO speakers have a nominal impedance of 3ohms, and the UniPivot tweeter aims the sound to your ears. Finally, the GTO speakers are designed with a nominal impedance of 3 ohms. Too bad the price is a little high and might turn off drivers on a tight budget. But if you're ready to make a significant financial investment, you won't be disappointed in the long run.

buy on Amazon

How Can I Get My 2017 Jeep Wrangler Stereo to Sounds Better?

Listening to music while driving is an essential aspect of the Jeep experience, whether it’s in town or off-roading. Unfortunately, many people are dissatisfied with the current Jeep Wrangler audio system.

While the Wrangler’s current audio system does not match up to the vehicle’s power, a few simple modifications and improvements can improve matters. Here you’ll find all of the upgrades you need to enhance your Jeep Wrangler’s sound system.

Add a Subwoofer

Subwoofers are one of the most common modifications that car enthusiasts undertake, regardless of their vehicle. This is especially true for Jeeps.

The car’s original sound system is made up of a few small, low-quality speakers. For sound dispersion, these speakers are dispersed throughout the vehicle.

However, because of the speakers’ low sound quality, it comes across as disconnected.

The easy remedy is to add a subwoofer!

Subwoofers add more bass to your system, improving the overall sound quality. A subwoofer in your Jeep Wrangler will also decrease the strain on the original smaller speakers, allowing them to produce even better sound.

Subwoofers are not only costly, but they’re also complex to construct. This is due to the fact that they require a number of parts. A good subwoofer should include a linear driver and an amplifier housed in a cabinet. You may bet your subwoofer will be low-quality if it costs too little.

Subwoofer replacement, on the other hand, might be a time-consuming or difficult job. This video will teach you how to install your new subwoofer for improved stereo performance.

If you don’t hear the bass sound quality you desire after installing a subwoofer in your automobile, consider performing one of the following procedures:

Upgrade the Front Speakers

The front speakers account for the majority of the sound in your car. The front speakers are positioned at both the bottom and top of the dash. Despite their efforts to provide sound equally, the speakers are spread out to make a significant improvement in bass response.

The adage «larger is better» should be fully followed in this case. You must upgrade to bigger speakers if you want to improve the quality of your Jeep Wrangler’s audio system.

The cost of installing a new front-end speaker system may appear to be prohibitive, but it is possible to accomplish for less than a hundred dollars!

While the speaker upgrade kit is rather inexpensive, the installation process will take considerably more time. Approximately 70 parts must be removed and reassembled in the correct sequence in order to access the system.

The procedure may take anywhere from three to six hours, depending on the size and complexity of the project. That is why expensive installations are common.

If you have experience working on the engine beneath a car’s hood, you may save money by doing this upgrade yourself. However, because of the complexity of the speaker installation, it may be a good idea to get it done by a professional.

If you don’t want to buy a speaker kit, another alternative is to have your Wrangler’s system built specifically for it.

This gives you more freedom to choose the right configuration for your listening requirements. Unfortunately, this premium setup has a high price and is thus not the finest option for those looking to upgrade their Jeep Wrangler on a budget.

If you don’t want to skimp on quality, installing a waterproof speaker will give you the sound of your dreams in your vehicle.

Add an Amp

If you completed the first two upgrades, this is a must-have item. In fact, if your subwoofer installation included the installation of an amplifier, make sure to include this essential component.

An amp will give your speaker system the extra power it needs to handle the improved and more complex systems.

If you’ve already pulled off the front speakers for an upgrade, this is the ideal moment to tackle your amp installation. There should be enough space inside the dash for the amp to sit securely, regardless of what amplifier you choose.

Some drivers install the amplifier beneath the passenger seat. While this is the most straightforward method to set up this system, it may not be the brightest idea. The placement of the amp on the floor exposes it to moisture damage and knocks. Install your amplifier in your dash so that it can function longer by keeping it safe.

To begin, connect the amp to the battery in whatever manner you choose. To reduce the risk of being shocked, make sure all connections from the battery are disconnected.

Not sure where to put the amplifier or how to connect it to the battery? There’s no need to be concerned! Learn how to install your new amplifier in the video below.

To reduce the chance of an electrical fire starting from a short, make sure there’s a fuse close to the battery.

Upgrade the Sound Bar

The sound bar is the portion of speakers positioned on the ceiling behind the first row of seats.

While these speakers aren’t particularly powerful, they do aid in the creation of a surround sound system. To improve the performance of your Jeep’s soundbar, you’ll need to replace each of the speakers and their enclosures.

Although the Jeep Wrangler is produced with a custom vented enclosure these days, it still does not provide the best audio quality.

Updating your Jeep’s speakers will not only allow for louder music, but it will also offer more bass and a deeper listening experience. It’ll be nice for your backseat passengers to enjoy the music as much as those in the front.

A modest amount of money, but nevertheless a significant investment. A complete soundbar and speaker transformation will set you back around three to four hundred dollars.

Do you want to save money while still improving the soundbar on your Jeep? With a few clever modifications, you may enjoy high-quality music and some spare cash.

To repair a speaker damage, start by taking out the speakers and the full speaker enclosure. Keep track of all of the pieces so you can put everything back together correctly.

The first step to improve the quality of your speakers is to reduce the sound of wires vibrating. When your music is played at louder volumes and with more bass, the wires begin to vibrate. Although this may not be a problem for you, it can become tiring after hearing it for some time.

Remove the wiring and set it aside to be dealt with later.

Take a look at the enclosure, and if you need to make any modifications, such as adding doors, panels, or other accessories, do so now. When the wiring is no longer in the way, take a moment to line the speaker enclosures with sound skins. This fantastic gadget will aid in keeping good acoustics in your system while also preventing panel vibration.

If you’re adding new speakers, now is the time to do the wiring. To decrease the sound of it vibrating within the case, wrap it in foam and tape it down.

To add more punch to your Jeep Wrangler soundbar, try adding polyfill. Polyfill is a form of polyester stuffing that is often used in sewing. This helps to reduce resonance and preserve the quality of your speakers by using this. Install after-market speakers to complete the upgrade.

If making a few simple adjustments doesn’t provide the required sound quality, consider replacing all of the components in the system, including the enclosure and speakers!

One or both of these upgrades is sure to elevate the (sound) standard for your speaker system.

Add More Speakers

Adding too many extra speakers to your Wrangler might start to take up all of the limited area available. Rather of feeling like you’re in your vehicle, you could begin to feel as though you’re riding in a radio.

However, if the current number of speakers does not provide the listening experience you desire, adding more speakers may be the answer.

You have plenty of room to add more speakers if you don’t utilize the space beneath the seats and in the trunk. If you want to keep those areas clear for other storage, you’ll need to get a little more inventive when it comes to speaker placement.

If you have knowledge in the area of custom car upgrades, this is a task you can probably complete on your own. However, if your experience is limited or non-existent, it would be prudent to work with a specialist fabricator for this job.

Speakers for 2017 Jeep Wrangler Speaker Buyer’s Guide

Materials Used

Because your new speaker system will accompany you on outdoor excursions, it’s critical to choose materials that are long-lasting and durable. For weatherproofing features, one approach is to opt for a product with a high IP rating.

Audio Quality

The sensitivity of the speaker, frequency response, RMS and peak power ratings are all important when it comes to speakers. They have an effect on the quality of your excellent sound. The RMS or root mean square is the continuous output of energy your speaker can deal with, whereas the peak power is the maximum rating for short bursts. Speakers with a high Hz car speakers offer enough watts peak power and RMS; impedance is another thing to consider. 4 ohm to 8 ohm is a common impedance for speakers, which refers to the speaker resistance.

Bass

You could connect a subwoofer to your stereo. The best available subwoofers for your Jeep are from the Kicker company. The Wrangler sounding bar will have technology built in to handle the low notes, however the speakers themselves are simple to install for your vehicle’s sound system.

Bluetooth Connectivity

If you don’t already have Bluetooth capability, it’s highly suggested that your speakers include it. They’ll be able to connect wirelessly to your extra media devices for simple streaming.

Installation

It’s important to look for a speaker pair that is simple to install. Examine whether or not the speakers in the package are two-way.

Are they consistent with your first covers? If they do, you’ll have a simpler time setting them up without having to remove the original ones.

Conclusion

There are several speakers available on the market, but when you pick the best speakers for a Jeep Wrangler sound bar, you know you’re getting something special.

The speakers, on the other hand, are from some of the most renowned and reputable manufacturers in the market. They have a long history in the business and are well-known companies. As a result, they are undoubtedly reliable.

You may check speakers for compatibility on sites like Amazon.com to see if they are suitable for installation in your vehicle. You’ll discover a lot of alternatives when it comes to the speakers, so you won’t run out anytime soon.

Finally, there are upgraded speakers that offer better features than the previous versions. So, if you already have one, you may upgrade them for improved sound quality.

Ver este vídeo en YouTube